Release everything and wait until the green light stops flashing: the printer enters 'service mode'. Release the 'resume' button, then press twice on the same button, still holding the 'power' button. Press and hold the 'resume' button, then do the same with the 'power' button.

The 'resume' button is a circle with an inner triangle pointing down: Note: The ink pad also physically exists in the printer under the print head, and there is a high probability that this pad is saturated with ink.Īlso, the printer is not waterproof, we advise you not to put it on a piece of furniture which could be damaged by ink running under the printer. The solution consists in carrying out a manipulation to reset this used ink counter to zero.ĭepending on your printer, there are different ways to reset the used ink counter. This, even if the printer worked well and printed correctly just before the message appeared. In this case, the manufacturer limits the life of the printer with a maximum number of pages to print. If the following message appears, 'End of life items or components, contact Canon Support' or 'Waste ink tank is almost full or full'. Or install another cartridge if it is not recognized. Solution: remove the cartridge, then put it back. Meaning: the tank cartridge is not correctly installed.

Solution: check that the hood is properly closed, that there is no gap or play, even slight. Contact your local Cartridge World store for a quote. After reinstalling the print head and cartridges, if the fault persists, the only solution is to change the print head or change the printer.Īs an indication, the value of a Canon inkjet printhead is around £65 ex vat.

Canon mp210 printer paper feed problem